Safety Blue RustSeal | Rust Prevention

Posted on November 21, 2011 by admin

MACHINERY RUST PREVENTION IN SAFETY BLUE

KBS RustSeal is a superior one part, completely non-porous, ready-to-use paint.

KBS RustSeal is a high-solid content, rust preventive coating, that is actually strengthened by exposure to moisture.

KBS RustSeal is impervious to road salts and most every chemical.

KBS RustSeal flows out to a beautiful, rock-hard, tough coating that is tough to chip or scratch. These exceptional properties make RustSeal specifically formulated to prevent corrosion and stop rust.

KBS RustSeal completely seals metal surfaces, blocking all the pores and preventing penetration of moisture, oxygen, and water vapor. Try some today…you’ll be amazed!

Features:

• CAN BE APPLIED DIRECTLY OVER RUST!

• SEALS & ENCAPSULATES RUST AND POROUS SURFACES

• APPLY BY BRUSH, ROLLER, OR SPRAY.

• SUPER STRONG AND FLEXIBLE – HAMMER TOUGH!

• HIGHLY RESISTANT TO MOST CHEMICALS

• MODERATE UV STABILITY, UNLIKE OTHERS WHICH CAN CHALK WITHIN WEEKS

• COMPATIBLE WITH ALL PAINT SYSTEMS

• COMPLETELY NON-POROUS

+CHECK OUT SAFETY BLUE RUSTSEAL

Apply RustSeal In Thin Coats | Tip Of The Month

Posted on July 20, 2011 by admin

APPLY RUSTSEAL IN THIN COATS

Remember that RustSeal should be applied in THIN coats. Applying too heavily, will cause running and/or sagging on vertical surfaces, and possible bubbling on horizontal surfaces. As RustSeal cures, it releases a small amount of carbon dioxide. If allowed to “puddle”, the top of the RustSeal directly exposed to the ambient humidity in the air (the actual catalyst for RustSeal) will begin to "skin" over. This "skinning over" is much like that of chocolate pudding and blocks the release of the afore mentioned carbon dioxide causing bubbles. By applying thin coats, this film cures through and through all at once.

MORE TIPS & TRICKS

RustSeal Fix-It Guide: This guide helps you quickly identify the causes of and the recommended solutions for the most common issues that could occur for RustSeal.

Note: We would love for you to share your tips with us.
Email us (suggestions@kbs-coatings.com) with your tips.

Cat Yellow RustSeal Used As Safety Yellow Paint

Posted on April 15, 2011 by admin

CAT YELLOW RUSTSEAL APPLIED TO MACHINERY

One of our customers uses Cat Yellow RustSeal as a safety yellow paint on the machinery at thier shop. They really like the RustSeal and sent us some pictures to show us the Cat Yellow RustSeal in action.

FEATURES OF RUSTSEAL – THE BEST STOP RUST PAINT

CAN BE APPLIED DIRECTLY OVER RUST!
SEALS & ENCAPSULATES RUST AND POROUS SURFACES
APPLY BY BRUSH, ROLLER, OR SPRAY.
SUPER STRONG AND FLEXIBLE – HAMMER TOUGH!
HIGHLY RESISTANT TO MOST CHEMICALS
MODERATE UV STABILITY, UNLIKE OTHERS WHICH CAN CHALK WITHIN WEEKS
COMPATIBLE WITH ALL PAINT SYSTEMS
ALL COLORS ARE COMPLETELY NON-POROUS

MORE INFORMATION AND DIRECTIONS ON RUSTSEAL

At KBS Coatings, we believe that offering the best Rust Preventive products is simply not enough. We alse believe in offering the best world-class customer support for using and applying all of our superior Rust Preventive products.

+Click Here for the KBS 3 Step System featuring KBS RustSeal

+Click Here for KBS RustSeal Complete Directions

+Click Here for the KBS RustSeal Flow Chart

+Click Here for KBS RustSeal Instructional Videos

+Click Here for KBS RustSeal on the KBS Suppot Forum

+Click Here for How To’s showing the application of KBS RustSeal

+Click Here for the KBS RustSeal Fix-It Guide

+Click Here for the KBS HelpDesk featuring Questions & Answers on KBS RustSeal

Fix Rusted Pinholes With RustSeal

Posted on April 3, 2011 by admin

A TIP FOR REPAIRING RUSTED OUT PINHOLES:

Put a piece of tape behind the larger pinholes, then paint with 2 coats of RustSeal. When the RustSeal dries, pull the tape off and coat the the back side with RustSeal as well.

Note: We would love for you to share your tips with us. Email us (suggestions@kbs-coatings.com) with your tips.

RustSeal Featured in Street Rodder Magazine

Posted on March 17, 2011 by admin

“We used a product called RustSeal from KBS Coatings because we’ve found it to be perfect for painting the chassis of cars that are driven since it requires a minimum of preparation and it’s tough as nails so it resists chipping. For those without the ability to spray paint, most KBS products can be brushed and flow out without any brush marks.”

See what else the May 2011 Street Rodder Magazine had to say about KBS Coatings.

KBS Coatings - Street Rodder Magazine - May 2011

+Page 1

You can also download the Entire Article in pdf format.
+CLICK HERE.